0.0

TEMPLATE

Vorgegebener Schablonenname, schreibgeschützt.

string (24)

Mandatory

Kat.I

1.0

EU_CD_TW

Internationaler Schlüssel für TransitionalWaterBody Der Schlüssel setzt sich zusammen aus dem MemberStateCode, dem FeatureClassCode und dem nationalen Schlüssel. Schema: <MemberStateCode>_ <FeatureClassCode>_ <LAND_CD>_<ID>

string (42)

Mandatory

Kat.I

1.1

LAND_CD

Der CountryStateCode wird in Anlehnung an die Regelungen der DIN EN ISO 3166-1 und DIN ISO 3166-2 aus zwei Alpha-2 Schluesseln zusammen gesetzt. Der erste Teil des Schluessels entspricht dem CountryCode, der zweite Schluesselbestandteil steht fuer die Verwaltungseinheiten (Bundesland). Fuer Deutschland sind diese Verwaltungseinheiten vorgegeben. Fuer andere Laender ist der Alpha-2 Schluessel (XX) frei waehlbar.

string (4)

Mandatory

Kat.I

1.2

LIABLE

CountryStateCode des federführenden Landes

string (4)

Mandatory

1.3

ARTIFICIAL

Angabe, ob Wasserköper künstlich ist

string (1)

Mandatory

Kat.I

1.4

BEGINLIFE

Date and time at which this version of the spatial object was inserted or changed in the spatial data set. -- Description -- NOTE This date is recorded to enable the generation of change only update files. -- Guidance -- Conditional. Data Providers should report this information, if available. Data Providers must report this information if the endLifespanVersion value is reported.

date (8)

Conditional, mandatory for endLifespanVersion is not null

YYYYMMDD

Kat.I

1.5

CHEM_STAT

Einstufung des chemischen Zustandes nach WRRL-Anhang V (1.4.3)

string (1)

Mandatory

Kat.I

1.6

DESIGBEGIN

time period defining when the management, restriction or regulation zone was legally designated or became effective in the real world.

date (8)

Mandatory

YYYYMMDD

Kat.I

1.7

ECO_POT

Einstufung des ökologischen Potentials von künstlichen oder erheblich veränderten Wasserkörpern nach WRRL-Anhang V (1.4.2.(ii))

string (1)

Conditional, mandatory for Twcharacter Artificial= "Y" or Twcharacter HeavilyModified = "Y"

Kat.I

1.8

ECO_STAT

Einstufung des ökologischen Zustands von natürlichen Wasserkörpern nach WRRL-Anhang V (1.4.2.(i))

string (1)

Conditional, mandatory for Twcharacter Artificial = "N" or Twcharacter HeavilyModified = "N"

Kat.I

1.9

ENDLIFE

Date and time at which this version of the spatial object was superseded or retired in the spatial data set. -- Description -- NOTE This date is recorded primarily for those systems which "close" an entry in the spatial data set in the event of an attribute change. -- Guidance -- Optional. If the version of the spatial object being reported is still unchanged in the national datasets, then Data Providers are not required to provide this information. For example, Data Providers reporting under WFD 2016 should report the current version of the spatial object: therefore the endLifespanVersion attribute is not required. This attribute is kept in the data model to allow future updates and support the traceability of changes to objects previously reported.

date (8)

Optional

YYYYMMDD

Kat.I

2.1

MODIFIED

Angabe, ob der Wasserkörper erheblich verändert ist

string (1)

Mandatory

Kat.I

2.2

HMWB_PA

For HMWBs only, report the physical alteration that has resulted in the designation of the surface water body as a HMWB. In the context of designation, physical alterations mean any significant alterations that have resulted in substantial changes to the hydromorphology of a surface water body such that the surface water body is substantially changed in character. In general, these hydromorphological characteristics are long-term and alter both the morphological and hydrological characteristics. Further guidance on the terms is found under the Glossary section below. Quality checks: Conditional check: Report if MODIFIED is ‘Y’.

string (254)

Conditional, mandatory for MODIFIED = 'Y'

Kat.I

2.3

HMWB_WU

For HMWBs only, report the water use for which it has been designated. ‘Wider environment’ can refer to designation in order to maintain nature protected areas and also archaeological sites and patrimony (see CIS Guidance Document No. 4 – Identification and Designation of Heavily Modified and Artificial Water Bodies ). Quality checks: Element check: A valid option must be selected from the enumeration list. More than one option can be selected. Conditional check: Report if MODIFIED is ‘Y’.

string (254)

Conditional, mandatory for MODIFIED = 'Y'

Kat.I

2.4

IMPACT

Angaben zu den Auswirkungen der Wasserkoerperbelastungen. Mehrfachnennungen sind möglich, kommasepariert ohne Leerstellen.

string (255)

Conditional, mandatory for Land_cd like "DE%"

Kat.I

2.5

IMPACT_OTH

If 'Other Significant Impacts' is selected from the enumeration list under Impact, provide details of any other impact types which are relevant in this element. This element should only be reported if the impact type is not included in the enumeration list under Impact. Quality checks: Conditional check: Report if 'Other Significant Impacts' is selected from the enumeration list under Impact.

string ​(1000)

Conditional, mandatory for 'Other Significant Impacts' selected from the enumeration list under swSignificantImpact​Type

Kat.I

2.6

INS_BY

Ansprechpartner

string (15)

Mandatory

Kat.I

2.7

INS_WHEN

Erstellungsdatum des Datensatzes

date (8)

Mandatory

YYYYMMDD

Kat.I

2.8

INV_LAND

Sofern mehrere Länder bei der Festlegung der Geometrie beteiligt sind sollen hier die jeweiligen CountryStateCodes angegeben werden. Diese werden in Anlehnung an die Regelungen der DIN EN ISO 3166-1 und DIN ISO 3166-2 aus zwei Alpha-2 Schluesseln zusammen gesetzt. Der erste Teil des Schluessels entspricht dem CountryCode, der zweite Schluesselbestandteil steht fuer die Verwaltungseinheiten (Bundesland). Fuer Deutschland sind diese Verwaltungseinheiten vorgegeben. Fuer andere Laender ist der Alpha-2 Schluessel (XX) frei waehlbar. Mehrfachnennungen sind möglich kommasepariert ohne Leerstellen.

string (49)

Optional

2.9

TY_CD_TW

Beschreibung der Typen nach WRRL-Anhang II (1.2.3) (Für Deutschland gilt: Sofern Empfehlungen in der LAWA-Arbeitshilfe zur WRRL ausgesprochen wurden, sollte diesen gefolgt werden. z.B. N0 = tidenbeeinflusstes Ästuar der Flachlandküste)

string (5)

Optional

Kat.I

3.0

METADATA

Der Name der Metadatendatei ist abhaengig vom hier erfassten Gebiet. Er kann auf vier verschiedene Arten gebildet werden. Er setzt sich zusammen aus der Kurzbezeichnung fuer die Schablone, dem CountryStateCode, dem WorkAreaCode oder dem RiverBasinDistrictCode und wird um die Dateinamenserweiterung XML ergaenzt. Alle Angaben sind in Grossbuchstaben auszufuehren.Schema: <TemplateShortName>_ <CountryStateCode>_ <WorkAreaCode>.XML or <TemplateShortName>_ <CountryStateCode>_ <RiverBasinDistrictCode>.XML or <TemplateShortName>_ <CountryStateCode>.XML or <TemplateShortName>_ <WorkAreaCode>.XML Beispiel: fuer Nordrhein-Westfalen fuer den Niederrhein: COMPATH_DENW_2800.XML fuer Nordrhein-Westfalen fuer den Rhein COMPATH_DENW_2000.XML fuer Nordrhein-Westfalen: COMPATH_DENW.XML fuer das Gesamtgebiet Niederrhein: COMPATH_2800.XML

string (255)

Mandatory

Kat.I

3.1

NAMETEXT

Name des Wasserkörpers.

string (250)

Mandatory

Kat.I

3.2

TEXTINTERN

Internationaler Name des Wasserkörpers.

string (250)

Optional

Kat.I

3.3

PLANU_CD

Code für die Planungseinheit

string (10)

Optional

Kat.I

3.4

QE11MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE11VAL <> "8"

3.5

QE11VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

3.6

QE11CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE11VAL <> "8"

3.7

QE11COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

3.8

QE121VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

3.9

QE121MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE121VAL <> "8"

4.0

QE121CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE121VAL <> "8"

4.1

QE121COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

4.2

QE122VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

4.3

QE122MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE122VAL <> "8"

4.4

QE122CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE122VAL <> "8"

4.5

QE122COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

4.6

QE12MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE12VAL <> "8"

4.7

QE12VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

4.8

QE12CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE12VAL <> "8"

4.9

QE12COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

5.0

QE13VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

5.1

QE13MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE13VAL <> "8"

5.2

QE13CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE13VAL <> "8"

5.3

QE13COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

5.4

QE14VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

5.5

QE14MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE14VAL <> "8"

5.6

QE14CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE14VAL <> "8"

5.7

QE14COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

5.8

QE21VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

5.9

QE21MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE21VAL <> "8"

6.0

QE21CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE21VAL <> "8"

6.1

QE21COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

6.2

QE23MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE23VAL <> "8"

6.3

QE23VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

6.4

QE23CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE23VAL <> "8"

6.5

QE23COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

6.6

QE311MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE311VAL <> "8"

6.7

QE311CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE311VAL <> "8"

6.8

QE311COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

6.9

QE311VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

7.0

TRANSB

Indicate whether the surface water body reaches the national border, extends across it or is shared with other countries (i.e. the river is the national border). Not relevant for territorial waters. Quality checks: Element check: Transboundary must be reported. A valid option must be selected from the enumeration list. Only one option can be selected. Within-schema check: 'No' should be reported if SurfaceWaterBodyCategory is 'TeW'.

string (1)

Mandatory

Kat.I

7.1

QE312CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE312VAL <> "8"

7.2

QE312COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

7.3

QE312VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

7.4

QE313MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE313VAL <> "8"

7.5

QE313VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

7.6

QE313CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE313VAL <> "8"

7.7

QE313COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

7.8

QE314MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE314VAL <> "8"

7.9

QE314VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

8.0

QE314CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE314VAL <> "8"

8.1

QE314COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

8.2

QE315VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

8.3

QE315MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE315VAL <> "8"

8.4

QE315CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE315VAL <> "8"

8.5

QE315COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

8.6

QE3161MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE3161VAL <> "8"

8.7

QE3161VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

8.8

QE3161CHAN

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE3161VAL <> "8"

8.9

QE3161COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

9.0

QE3162MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE3162VAL <> "8"

9.1

QE3162VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

9.2

QE3162CHAN

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE3162VAL <> "8"

9.3

QE3162COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

9.4

QE33MONP

If the QE was monitored and the classification was derived from the monitoring data available, indicate the year/period of the monitoring data which was used in the classification. LAWA-interne Festlegung: Es gelten das Datum bzw. die Jahre der Bewertung, nicht der Messung. Format: YYYY oder YYYY--YYYY.

string (10)

Conditional, mandatory for QE33VAL <> "8"

9.5

QE33VAL

Required. Indicate the results of the assessment of this QE for all relevant surface water categories. '1' = High status or maximum potential. '2' = Good status or potential. '3' = Moderate status or potential (for QE1) or less than good status or potential (for QE2 and QE3). '4' = Poor status or potential (this option is only valid for quality elements starting with QE1). '5' = Bad status or potential (this option is only valid for quality elements starting with QE1). 'MonitoredButNotUsed' = Monitored but no standard has been developed and/or the QE is not used for status assessment (this option is only valid for quality elements starting with QE2 or QE3). 'Unknown' = Unknown status or potential. 'Not applicable' = Not applicable If there is no monitoring information for this QE and/or status is unknown then select ' Unknown' from the enumeration list. If the QE is not applicable in the surface water category or type then select option 'Not applicable' from the enumeration list. Quality checks: Within-schema check: if surfaceWaterCategory is 'TeW' then 'Not applicable' must be selected. If qeCode is any quality element starting with QE1, the option 'MonitoredButNotUsed' is not valid. If qeCode is any quality element starting with QE2 or QE3, the options '4' and '5' are not valid.

string (1)

Mandatory

Kat.I

9.6

QE33CHANG

Report the change in classification since the first RBMP: '+2' = Improvement by 2 or more classifications. '+1' = Improvement by 1 classification. '0' = No change of classification. ‘-1' = Deterioration by 1 classification. ‘-2' = Deterioration by 2 or more classifications. 'Unknown2010' = Status or potential was unknown in 2010. 'Information not available' = Information not available

string (1)

Conditional, mandatory for QE33VAL <> "8"

9.7

QE33COMP

Conditional. If there has been a change in classification since the first RBMP was reported, indicate whether the reported change in status or potential is considered as being/due to: 'Consistent change' = A real change of status due to measures or due to increased/decreased pressures. 'Inconsistent due to changes to monitoring' = A significant change in monitoring (site, methodology) since the first RBMPs. 'Inconsistent due to changes to assessment methods' = A significant change in the assessment method since the first RBMPs. 'Inconsistent due to changes to monitoring and assessment methods' = A significant change in monitoring (site, methodology) and the assessment method since the first RBMPs. The default value to select should be 'Consistent change'. Quality checks Conditional check: Report if qeStatusOrPotentialChange is '+2', '+1', '-1' or '-2'.

string (1)

Conditional, mandatory for qeStatusOrPotential​Change = '+2', '+1', '-1' or '-2'.

9.8

RBD_CD

Kennung fuer die Flussgebietseinheit. Der Code besteht aus einer vierstelligen Numerierung fuer die Flussgebietseinheit.

string (4)

Mandatory

Kat.I

9.9

SCALE

Maßstabskategorie nach Codelist: Name &ndash; Value: H: High - scales greater than 1:25.000 L: Large - scales smaller than or equal to 1:25.000 and greater than 1:50.000 M: Medium - scales smaller than or equal to 50.000 and greater than 200.000 S: Small - scales smaller than or equal to 200.000 U: Unknown

string (1)

Mandatory

Kat.I

10.0

INT_CAL_TP

If the surface water body type corresponds with an intercalibration type, report the intercalibration type code (not name). The intercalibration type reported in this element must be appropriate to the surface water body’s Category. If there is no corresponding intercalibration type, select ‘Not relevant’. Report 'Not relevant' for territorial waters. Quality checks: Element check: SurfaceWaterBodyIntercalibrationType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: 'Not relevant' should be reported if SurfaceWaterBodyCategory is 'TeW'. Cross-schema check: SurfaceWaterBodyIntercalibrationType must be consistent with the codes reported in SWMET/IntercalibrationType

string (254)

Mandatory

Kat.I

10.2

CHEM_ASSC

Required. Indicate the confidence on the chemical status assigned. ‘0’ = No information. ‘1’ = Low confidence. ‘2’ = Medium confidence. ‘3’ = High confidence. The criteria used by Member States to assess confidence vary considerably, but general guidance may be: Low = no monitoring data; Medium = limited or insufficiently robust monitoring data for some or all Priority Substances that are discharged in the RBD; High = good data for all Priority Substances that are discharged in the RBD. LAWA-interne Festlegung: es ist für DE grundsätzlich '3' für 'High confidence' einzugeben

string (1)

Mandatory

Kat.I

10.3

ECO_ASSC

Required. Indicate the confidence on the chemical status assigned. '0' = No information. '1' = Low confidence. '2' = Medium confidence. '3' = High confidence. The criteria used by Member States to assess confidence vary considerably, but general guidance may be: Low = no monitoring data; Medium = limited or insufficiently robust monitoring data for some or all Priority Substances that are discharged in the RBD; High = good data for all Priority Substances that are discharged in the RBD. LAWA-interne Festlegung: es ist für DE grundsätzlich '3' für 'High confidence' einzugeben

string (1)

Mandatory

Kat.I

10.4

SIGPRO

Conditional. If '7 Other anthropogenic pressures' is selected from the enumeration list and reported under swSignificantPressureType, provide details of any other anthropogenic pressure types which are relevant in this element. This element should only be reported if the pressure type is not included in the enumeration list under swSignificantPressureType. Quality checks: Conditional check: Report if '7 Other anthropogenic pressures' is selected from the enumeration list under swSignificantPressureType.

string ​(1000)

Conditional, mandatory for '7 Other anthropogenic pressures' = selected from the enumeration list under SwSignificant​PressureType.

Kat.I

10.5

SIGPR

Required. Indicate the significant pressure type(s) from the enumeration list. If a combination of pressure-driver is not significant on its own but it is in combination with others, select all the relevant pressures of that type that are present which make the overall pressure significant (e.g. if abstraction from industry or agriculture is not relevant on their own but they are relevant in combination, select both). If the ecological status or potential of the surface water body is less than good, at least one significant pressure type must be reported. The option 'No significant pressure types' is not valid. If the chemical status of the surface water body is less than good, at least one significant pressure type must be reported. The option 'No significant pressure types' is not valid. Quality checks: Within-schema check: the option 'No significant pressure types' is not compatible with any other. Within-schema check: the option 'Not relevant' is not compatible with any other option and can be selected if and only if surfaceWaterBodyCategory is 'TeW' (not compatible with any other surfaceWaterBodyCategory). Within-schema check: If SWB/SurfaceWaterBody/swEcologicalStatusOrPotentialValue is '3', '4' or '5', at least one significant pressure type must be selected from the enumeration list (can include option '8 Unknown pressures'). The option 'No significant pressure types' is not a valid selection. Within-schema check: If SWB/SurfaceWaterBody/swChemicalStatusValue is '3', at least one significant pressure type must be selected from the enumeration list (can include '8 Unknown pressures'). The option 'No significant pressure types' is not a valid selection. Mehrfachnennungen sind möglich, kommasepariert ohne Leerstellen.

string (254)

Conditional, mandatory for Land_cd like 'DE%'

Kat.I

10.6

URL

URL einer optionalen Web-Seite zur objektbezogenen Einbindung eigener internetbasierter Informationsquellen. Der URL sollte stets in der Form http://-prefix aufgebaut werden.

string (255)

Optional

Kat.I

10.7

WB_PREDEC

Sofern der nationale Code dieses Wasserkörpers seit der letzten Datenlieferung geändert wurde, soll hier der letzte berichtete Code (EU_CD_TW) des/der geänderten Wasserkörper(s) angegeben werden. Mehrfachnennungen sind möglich kommasepariert ohne Leerstellen. Fehlwert: -9999

string (255)

Optional

Kat.I

10.8

EVOLUTIONT

Angabe der Änderung des Wasserkörpers. Detailinformation: Type of event that produced or modified the version of the object being reported. This attribute is required to explicitly report changes and update the current status of the object in the Water Information System for Europe. -- Further information -- See the GIS guidance for additional information on the management of life-cycle information.

string (33)

Mandatory

Kat.I

10.9

WA_CD

Kennung fuer das Bearbeitunsgebiet bzw. den Koordinierungsraum. Der Code besteht aus einer vierstelligen Numerierung fuer das Bearbeitungsgebiet bzw. den Koordinierungsraum.

string (10)

Mandatory

Kat.I